#include <string.h>
#include <stdio.h>
#include <stdlib.h>

#include "stm32f10x.h"


#include "Timer.h"
#include "OLED.h"

#include "GPIOA.h"
#include "Usart1.h"
#include "Usart2.h"
#include "Regist.h"
#include "PumpBusiness.h"
#include "CONFIG.h"
#include "mbedtls_util.h"
#include "Common_Util.h"

#include "Timer_Module.h"
#include "Log_Module.h"

#include "Tuoreniot.h"
#include "bc260y.h"
#include "esp32.h"
#include "At_Module.h"


// 6365736869303036
uint8_t mcu_id[8] = "ceshi007";

// 计时器
static struct TIMER_Struct timer;

static uint8_t regist_flag = 0;

char ch[30] = "11111111111111111111111111111";

int main(void)
{
//	uint8_t memmem_flag = 0;
	Timer_Init();//定时器
	Usart1_Init();//打印串口
	Usart2_Init();//4G模块通信
	GPIOA_Init();//4G模块DTR IO口
	
	OLED_Init();
	OLED_Clear();
	OLED_ShowString(1, 1, "MS:");
	
	Log_Printf_Debug("1234\r\n");
	bytesToHex(ch, mcu_id, sizeof(mcu_id));

	// 通讯流程初始化
	PUMPBUSINESS_Init();
	
	while(1)
	{
		// 循环执行udp客户端OLED_ShowNum
		OLED_ShowNum(1, 4, time_get_delay(&timer), 6);
		if(time_get_delay(&timer) > 60 * 1000)
		{
			time_clear(&timer);
		}

		// 注册接口使用方法
		if(regist_flag == 0)
		{
			if(TUORENIOT_GetCodeOfRegistResponse() != 200)
			{
				Log_Printf_Debug("开始注册\r\n");
				// 开始注册
				REGIST_Start();
			}
			else
			{
				Log_Printf_Debug("已注册\r\n");
			}
			regist_flag = 1;
		}
		//判断注册流程是否成功
		if(REGIST_GetStatus() == REGIST_Status_Done)
		{
			Log_Printf_Debug("注册结束\r\n");
			if(REGIST_GetResult() == REGIST_Result_Success)
			{
				Log_Printf_Debug("注册成功: %d\r\n", REGIST_GetResult());
				Network_Success_Flag = 1;
			}
			else if(REGIST_GetResult() == REGIST_Result_Failure)
			{
				Log_Printf_Debug("注册失败: %d\r\n", REGIST_GetResult());
				Network_Success_Flag = 0;
			}
			// 重置注册
			REGIST_Reset();
		}
		// 通讯流程处理
		PUMPBUSINESS_ProcessHandle();
		
	}
	
}