NIM_DSP6748/extern/usblib/include/usbdcdc.h

//*****************************************************************************
//
// usbdcdc.h - USBLib support for generic CDC ACM (serial) device.
//
// Copyright (c) 2008-2010 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
// 
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of AM1808 StarterWare USB Library and reused from revision 6288 
// of the  Stellaris USB Library.
//
//*****************************************************************************

#ifndef __USBDCDC_H__
#define __USBDCDC_H__

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
//! \addtogroup cdc_device_class_api
//! @{
//
//*****************************************************************************

//*****************************************************************************
//
// PRIVATE
//
// The first few sections of this header are private defines that are used by
// the USB CDC Serial code and are here only to help with the application
// allocating the correct amount of memory for the CDC Serial device code.
//
//*****************************************************************************

//*****************************************************************************
//
// PRIVATE
//
// This enumeration holds the various states that the device can be in during
// normal operation.
//
//*****************************************************************************
typedef enum
{
    //
    // Unconfigured.
    //
    CDC_STATE_UNCONFIGURED,

    //
    // No outstanding transaction remains to be completed.
    //
    CDC_STATE_IDLE,

    //
    // Waiting on completion of a send or receive transaction.
    //
    CDC_STATE_WAIT_DATA,

    //
    // Waiting for client to process data.
    //
    CDC_STATE_WAIT_CLIENT
}
tCDCState;

//*****************************************************************************
//
// PRIVATE
//
// This structure defines the private instance data and state variables for the
// CDC Serial device.  The memory for this structure is pointed to by the
// psPrivateCDCSerData field in the tUSBDCDCDevice structure passed on
// USBDCDCInit().
//
//*****************************************************************************
typedef struct
{
    unsigned int ulUSBBase;
    tDeviceInfo *psDevInfo;
    tConfigDescriptor *psConfDescriptor;
    volatile tCDCState eCDCRxState;
    volatile tCDCState eCDCTxState;
    volatile tCDCState eCDCRequestState;
    volatile tCDCState eCDCInterruptState;
    volatile unsigned char ucPendingRequest;
    unsigned short usBreakDuration;
    unsigned short usControlLineState;
    unsigned short usSerialState;
    volatile unsigned short usDeferredOpFlags;
    unsigned short usLastTxSize;
    tLineCoding sLineCoding;
    volatile tBoolean bRxBlocked;
    volatile tBoolean bControlBlocked;
    volatile tBoolean bConnected;
    unsigned char ucControlEndpoint;
    unsigned char ucBulkINEndpoint;
    unsigned char ucBulkOUTEndpoint;
    unsigned char ucInterfaceControl;
    unsigned char ucInterfaceData;
}
tCDCSerInstance;


#ifndef DEPRECATED
//*****************************************************************************
//
// The number of bytes of workspace required by the CDC device class driver.
// The client must provide a block of RAM of at least this size in the
// psPrivateCDCSerData field of the tUSBCDCDevice structure passed on
// USBDCDCInit().
//
// This value is deprecated and should not be used, any new code should just
// pass in a tUSBCDCDevice structure in the psPrivateCDCSerData field.
//
//*****************************************************************************
#define USB_CDCSER_WORKSPACE_SIZE (sizeof(tCDCSerInstance))
#endif

//*****************************************************************************
//
// The following defines are used when working with composite devices.
//
//*****************************************************************************

//*****************************************************************************
//
//! The size of the memory that should be allocated to create a configuration
//! descriptor for a single instance of the USB Serial CDC Device.
//! This does not include the configuration descriptor which is automatically
//! ignored by the composite device class.
//
// For reference this is sizeof(g_pIADSerDescriptor) +
// sizeof(g_pCDCSerCommInterface) + sizeof(g_pCDCSerDataInterface)
//
//*****************************************************************************
#define COMPOSITE_DCDC_SIZE     (8 + 35 + 23)

//*****************************************************************************
//
// CDC-specific events These events are provided to the application in the
// \e ulMsg parameter of the tUSBCallback function.
//
//*****************************************************************************

//
//! The host requests that the device send a BREAK condition on its
//! serial communication channel.  The BREAK should remain active until
//! a USBD_CDC_EVENT_CLEAR_BREAK event is received.
//
#define USBD_CDC_EVENT_SEND_BREAK (USBD_CDC_EVENT_BASE + 0)

//
//! The host requests that the device stop sending a BREAK condition on its
//! serial communication channel.
//
#define USBD_CDC_EVENT_CLEAR_BREAK (USBD_CDC_EVENT_BASE + 1)

//
//! The host requests that the device set the RS232 signaling lines to
//! a particular state.  The ulMsgValue parameter contains the RTS and
//! DTR control line states as defined in table 51 of the USB CDC class
//! definition and is a combination of the following values:
//!
//! (RTS) USB_CDC_DEACTIVATE_CARRIER or USB_CDC_ACTIVATE_CARRIER
//! (DTR) USB_CDC_DTE_NOT_PRESENT or USB_CDC_DTE_PRESENT
//
#define USBD_CDC_EVENT_SET_CONTROL_LINE_STATE (USBD_CDC_EVENT_BASE + 2)

//
//! The host requests that the device set the RS232 communication
//! parameters.  The pvMsgData parameter points to a tLineCoding structure
//! defining the required number of bits per character, parity mode,
//! number of stop bits and the baud rate.
//
#define USBD_CDC_EVENT_SET_LINE_CODING (USBD_CDC_EVENT_BASE + 3)

//
//! The host is querying the current RS232 communication parameters.  The
//! pvMsgData parameter points to a tLineCoding structure that the
//! application must fill with the current settings prior to returning
//! from the callback.
//
#define USBD_CDC_EVENT_GET_LINE_CODING (USBD_CDC_EVENT_BASE + 4)

//*****************************************************************************
//
//! The structure used by the application to define operating parameters for
//! the CDC device.
//
//*****************************************************************************
typedef struct
{
    //
    //! The vendor ID that this device is to present in the device descriptor.
    //
    unsigned short usVID;

    //
    //! The product ID that this device is to present in the device descriptor.
    //
    unsigned short usPID;

    //
    //! The maximum power consumption of the device, expressed in milliamps.
    //
    unsigned short usMaxPowermA;

    //
    //! Indicates whether the device is self- or bus-powered and whether or not
    //! it supports remote wakeup.  Valid values are USB_CONF_ATTR_SELF_PWR or
    //! USB_CONF_ATTR_BUS_PWR, optionally ORed with USB_CONF_ATTR_RWAKE.
    //
    unsigned char ucPwrAttributes;

    //
    //! A pointer to the callback function which will be called to notify
    //! the application of all asynchronous control events related to the
    //! operation of the device.
    //
    tUSBCallback pfnControlCallback;

    //
    //! A client-supplied pointer which will be sent as the first
    //! parameter in all calls made to the control channel callback,
    //! pfnControlCallback.
    //
    void *pvControlCBData;

    //
    //! A pointer to the callback function which will be called to notify
    //! the application of events related to the device's data receive channel.
    //
    tUSBCallback pfnRxCallback;

    //
    //! A client-supplied pointer which will be sent as the first
    //! parameter in all calls made to the receive channel callback,
    //! pfnRxCallback.
    //
    void *pvRxCBData;

    //
    //! A pointer to the callback function which will be called to notify
    //! the application of events related to the device's data transmit
    //! channel.
    //
    tUSBCallback pfnTxCallback;

    //
    //! A client-supplied pointer which will be sent as the first
    //! parameter in all calls made to the transmit channel callback,
    //! pfnTxCallback.
    //
    void *pvTxCBData;

    //
    //! A pointer to the string descriptor array for this device.  This array
    //! must contain the following string descriptor pointers in this order.
    //! Language descriptor, Manufacturer name string (language 1), Product
    //! name string (language 1), Serial number string (language 1),
    //! Control interface description string (language 1), Configuration
    //! description string (language 1).
    //!
    //! If supporting more than 1 language, the strings for indices 1 through 5
    //! must be repeated for each of the other languages defined in the
    //! language descriptor.
    //
    const unsigned char * const *ppStringDescriptors;

    //
    //! The number of descriptors provided in the ppStringDescriptors
    //! array.  This must be 1 + (5 * number of supported languages).
    //
    unsigned int ulNumStringDescriptors;

    //
    //! A pointer to the private instance data for this device.  This memory
    //! must remain accessible for as long as the CDC device is in use and must
    //! not be modified by any code outside the CDC class driver.
    //
    tCDCSerInstance *psPrivateCDCSerData;
}
tUSBDCDCDevice;

extern tDeviceInfo g_sCDCSerDeviceInfo;

//*****************************************************************************
//
// API Function Prototypes
//
//*****************************************************************************
extern void * USBDCDCCompositeInit(unsigned int ulIndex,
                                   const tUSBDCDCDevice *psCDCDevice);
extern void *USBDCDCInit(unsigned int ulIndex,
                         const tUSBDCDCDevice *psCDCDevice);
extern void USBDCDCTerm(void *pvInstance);
extern void *USBDCDCSetControlCBData(void *pvInstance, void *pvCBData);
extern void *USBDCDCSetRxCBData(void *pvInstance, void *pvCBData);
extern void *USBDCDCSetTxCBData(void *pvInstance, void *pvCBData);
extern unsigned int USBDCDCPacketWrite(void *pvInstance,
                                        unsigned char *pcData,
                                        unsigned int ulLength,
                                        tBoolean bLast);
extern unsigned int USBDCDCPacketRead(void *pvInstance,
                                       unsigned char *pcData,
                                       unsigned int ulLength,
                                       tBoolean bLast);
extern unsigned int USBDCDCTxPacketAvailable(void *pvInstance);
extern unsigned int USBDCDCRxPacketAvailable(void *pvInstance);
extern void USBDCDCSerialStateChange(void *pvInstance,
                                     unsigned short usState);
extern void USBDCDCPowerStatusSet(void *pvInstance, unsigned char ucPower);
extern tBoolean USBDCDCRemoteWakeupRequest(void *pvInstance);

//*****************************************************************************
//
// Close the Doxygen group.
//! @}
//
//*****************************************************************************

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif // __USBDCDC_H__