#ifndef __LORAWAN_H
#define __LORAWAN_H

#include "stm32f10x.h"

typedef enum {
	MODE_INT,
	MODE_CMD,		//mode pin high
	MODE_TRANSPARENT,
} LoraNode_Mode_T;
/*
typedef enum {
	NET_ABP,
	NET_OTAA,
} LoraNode_NetMode_T;
*/
typedef enum {
	MODE_WAKEUP,
	MODE_SLEEP,	
} LoraNode_SleepMode_T;
/*
typedef struct {
	uint8_t DevEUI[8];	
	uint8_t AppEUI[8];	
	uint8_t DevADDR[4];	
	uint8_t AppKEY[16];	
	uint8_t AppSKEY[16];	
	uint8_t NwkSKEY[16];

	uint8_t Join;
	LoraNode_Mode_T MODE;
	uint8_t ONline;
	uint8_t BUSY;
	uint8_t NET_Mode;
	uint8_t Confirm;
} Node_Info;

typedef struct {
	uint8_t Up_Result;	
	uint8_t Up_CH;	
	uint8_t Up_RATE;	
	uint8_t Up_DB;	
	uint32_t Up_Link;	
	uint16_t Up_Cache;
	uint16_t Resend;
} Send_Info;

*/

/* Lorawan Node pin configuration */
#define LORANODE_WAKE_PIN					GPIO_Pin_4
#define LORANODE_WAKE_GPIO_PORT         	GPIOC
												
#define LORANODE_MODE_PIN					GPIO_Pin_7
#define LORANODE_MODE_GPIO_PORT         	GPIOC
													
#define LORANODE_NRST_PIN					GPIO_Pin_7
#define LORANODE_NRST_GPIO_PORT         	GPIOA
													
/* INPUT */													
#define LORANODE_STAT_PIN					GPIO_Pin_8
#define LORANODE_STAT_GPIO_PORT         	GPIOC
														
#define LORANODE_BUSY_PIN					GPIO_Pin_0
#define LORANODE_BUSY_GPIO_PORT         	GPIOB

/* stop the wfi sleep */	

#define LORANODE_GPIO_PORT				  LORANODE_BUSY_GPIO_PORT //LORANODE_STAT_GPIO_PORT 	

#define LORANODE_WAKE_HIGH()      GPIO_WriteBit(LORANODE_WAKE_GPIO_PORT, LORANODE_WAKE_PIN, Bit_SET)
#define LORANODE_WAKE_LOW()     GPIO_WriteBit(LORANODE_WAKE_GPIO_PORT, LORANODE_WAKE_PIN, Bit_RESET)													
													
#define LORANODE_MODE_HIGH()      GPIO_WriteBit(LORANODE_MODE_GPIO_PORT, LORANODE_MODE_PIN, Bit_SET)
#define LORANODE_MODE_LOW()     GPIO_WriteBit(LORANODE_MODE_GPIO_PORT, LORANODE_MODE_PIN, Bit_RESET) 

#define LORANODE_NRST_HIGH()      GPIO_WriteBit(LORANODE_NRST_GPIO_PORT, LORANODE_NRST_PIN, Bit_SET)
#define LORANODE_NRST_LOW()     GPIO_WriteBit(LORANODE_NRST_GPIO_PORT, LORANODE_NRST_PIN, Bit_RESET)

#define LORANODE_STAT_STATUS	GPIO_ReadInputDataBit(LORANODE_STAT_GPIO_PORT, LORANODE_STAT_PIN)
#define LORANODE_BUSY_STATUS	GPIO_ReadInputDataBit(LORANODE_BUSY_GPIO_PORT, LORANODE_BUSY_PIN)
#define LORANODE_MODE_STATUS	GPIO_ReadOutputDataBit(LORANODE_MODE_GPIO_PORT, LORANODE_MODE_PIN)

uint8_t StrToHex(uint8_t temp);

void LoraNode_GPIO_Init(void);
void LoraNode_Init_Mode(LoraNode_Mode_T mode);
void LoraNode_Wake_Sleep(LoraNode_SleepMode_T mode);
static void LoraNode_Reset(void);

void LoraNode_OTAA_Config(void);

void transparent_send_data(uint8_t *DataBuf, uint32_t xmitLen); //在透传模式下发送数据

void lorawan_Sleep(void);
#endif