#ifndef __USARTSETUP_H__
#define __USARTSETUP_H__
/*--------------------------------------------------------------------------------------
*  @file     USARTSetup.h
*  @author   ZhangJing
*  @version  base on stm32f0x   
*  @date     2015.09.11
*  @brief    串口驱动
---------------------------------------------------------------------------------------*/
#include "stdint.h"

#define	USART1_RECV_LEN		32			//串口1接收缓冲长度
#define USART1_XMIT_LEN		64			//串口1发送缓冲长度

#define	USART2_RECV_LEN		80			//串口2接收缓冲长度
#define USART2_XMIT_LEN		34			//串口2发送缓冲长度

#define	USART3_RECV_LEN		32			//串口3接收缓冲长度
#define USART3_XMIT_LEN		64			//串口3发送缓冲长度

extern uint8_t	usart1XmitBuffer[USART1_XMIT_LEN];	//USART1发送缓冲
extern uint8_t	usart1RecvBuffer[USART1_RECV_LEN];	//USART1接收缓冲
extern uint8_t	usart1RecvCnt;										//USART1接收计数

extern uint8_t	usart2XmitBuffer[USART2_XMIT_LEN];	//USART2发送缓冲
extern uint8_t	usart2RecvBuffer[USART2_RECV_LEN];	//USART2接收缓冲
extern uint8_t	usart2RecvCnt;	//USART2接收计数

extern uint8_t	usart3XmitBuffer[USART3_XMIT_LEN];	//USART3发送缓冲
extern uint8_t	usart3RecvBuffer[USART3_RECV_LEN];	//USART3接收缓冲
extern uint8_t	usart3RecvCnt;	//USART3接收计数

void USART1_Init(uint32_t BaudRate);
void USART2_Init(uint32_t BaudRate);
void USART3_Init(uint32_t BaudRate);
void USART1Send( uint8_t *xmitDataBuf, uint32_t xmitLen );
void USART2Send( uint8_t *xmitDataBuf, uint32_t xmitLen );
void USART3Send( uint8_t *xmitDataBuf, uint32_t xmitLen );

void UART1_TRxOver_Interrupt(void);
void UART2_TRxOver_Interrupt(void);

#endif